Approximate starting packages for Generac Next Gen standby generators, plus Good / Better / Best planning ranges for kitchen, bath, deck, and flooring. Use these to orient — then schedule a site visit for a firm written estimate.
Not a quote
Every figure on this page is a starting range or package ballpark only — not a bid, proposal, or contract. Final price requires a site visit (and a load calculation for generators). Finishes, access, permits, demo, and hidden conditions change the number. Insurance restoration is claim/adjuster-driven and is not shown here.
Planning calculator
Pick a Package or Size
Featured turnkey packages first. Other Next Gen sizes show current starting ranges. Results are ballparks only.
Your selection
Choose one option. Your starting range updates instantly.
Featured turnkey packages
Other size starting ranges
Featured turnkey
Most-Requested Packages
Fixed starting packages for common whole-home sizes. Scope beyond the package is billed separately.
Featured · Next Gen
22 kW Turnkey
$16,100
Unit install (Generac Next Gen air-cooled)
Up to 30 ft gas run
Up to 30 ft electrical run
200A automatic transfer switch
1 year Strive Premium service plan
Not included: extra gas/electrical beyond 30 ft, LP tank, permit, and anything outside this package scope.
Featured · Next Gen
26 kW Turnkey
$18,000
Turnkey Generac Next Gen install package
Sized for larger whole-home loads
Transfer switch included in package scope
Installed by Strive (authorized dealer)
Not included: extra gas/electrical, LP tank, permit, and anything beyond package scope. Confirm final inclusions on your site visit.
These are approximate starting packages — not a quote. Firm pricing after site visit and load calculation.
Other size starting ranges
Next Gen Size Ballparks
Straight natural-gas installs on typical sites. LP tank and permit are always separate. Complex sites land toward the top of the range.
Size
Typical installed range
Model
10 kW
$8,500 – $11,500
7321
14 kW
$11,000 – $14,500
7323
18 kW
$13,500 – $17,500
7324
22 kW
$16,000 – $20,500
7325
24 kW
$17,500 – $22,500
7326
Planning ranges only — not a quote. Final generator pricing is firm after site visit and load calculation. Generac Next Gen air-cooled standby — not “Guardian.”
Common adders
Typical Allowances
Often line-itemed when not already covered by a package. Final amounts depend on the site.
Concrete / composite pad
$850
Standard air-cooled pad allowance
Gas stub / natural gas (≤30 ft)
$1,200
Simple connection; longer runs separate
Electrical permit
~$275
Pass-through; county-dependent
ATS upgrade (if not in kit)
$1,850
Many Next Gen kits already include ATS
Trenching
$18/lf
Soft soil; rock/driveway extra
LP / propane tank
Separate
Never bundled into turnkey — always its own line
Service & plans
Keep It Running
Generator service rates and annual Strive plans. The 22 kW featured package includes one year of Premium.
Service-call minimum
$320
Covers diagnosis / first block of time
Generator tech
$140/hr
After the service-call minimum
Travel fee
$85
Per visit
Basic
$399 /yr
1 maintenance visit
OEM oil, filters, spark plugs
Battery load test + ATS + system test
Multi-point inspection + report
Warranty-compliance maintenance
Advanced
$649 /yr
2 visits · priority · 10% repair discount
Everything in Basic
Two maintenance visits per year
Priority scheduling
10% discount on repairs (parts & labor)
Premium
$1,299 /yr
2 visits · 15% repair · Mobile Link
Everything in Advanced
15% repair discount
One waived service-call minimum / year
Mobile Link 24/7 monitoring
Annual load-bank test
Priority emergency response
Battery service as needed
Included with 22 kW featured package: 1 year of Strive Premium (mapped from Dalton’s “Platinum” language to our Premium plan name).
Kitchen remodel
Good · Better · Best
Planning ranges for Fredericksburg / Stafford / Spotsylvania. Layout moves, structural work, and finish level drive the final number.
Good
Cosmetic
$8,000 – $25,000
Cabinet paint or reface, new hardware, and paint; optional counter/backsplash refresh. Layout stays.
Better
Pull-and-replace mid
$30,000 – $65,000
New cabinets, counters, flooring, and appliance upgrades in a mostly unchanged layout.
Best
Custom / layout changes
$65,000 – $120,000+
Custom cabinets, premium finishes, and layout or island changes. Upper end for complex reworks.
Typically includes
Cabinet paint/refacing, hardware, paint, and optional counter/backsplash refresh for Cosmetic; new cabinets, counters, flooring, and appliances for Pull-and-replace mid; custom work and layout changes for Best.
Typically excludes
Structural wall moves beyond the selected tier, major electrical or service upgrades, relocating gas/plumbing runs, design fees, permits, and work outside the kitchen scope.
Installed starting range — not a quote. Firm after site visit. Finishes, access, permits, demo, and hidden conditions change the number. This is a planning range only — not a bid or contract.
Bath remodel
Good · Better · Best
Guest refresh through primary suite. Tile, waterproofing, and layout tweaks move you up the bands.
Good
Cosmetic / guest
$8,000 – $18,000
Vanity, toilet, faucet, paint and floor refresh, plus light shower updates (liner/insert or surround refresh when it fits). Layout stays.
Better
Full mid-range
$18,000 – $35,000
Tub/shower or tile shower, vanity, toilet, tile/floor, fixtures. Typical full bath remodel.
Best
Primary / luxury
$35,000 – $65,000+
Custom vanity, extensive tile, premium fixtures, possible layout tweak.
Typically includes
Demo of finishes; fixtures per tier; light shower liner/insert or surround refresh on Good when scoped; waterproofing on wet walls when tiled; paint; flooring in the bath.
Typically excludes
Moving drain stacks, structural framing, hazmat (ACM/LBP), heated floors or steam as adders.
Installed starting range — not a quote. Firm after site visit. Scope, tile, and plumbing access drive the final figure. This is a planning range only — not a bid or contract.
Deck build
Good · Better · Best
Pressure-treated through premium composite. Size, height, and railing details move the range.
Good
Simple PT
$12,000 – $25,000
About 150–250 SF pressure-treated, simple/low height, basic rail and stairs as required.
Better
PT or entry composite
$25,000 – $50,000
About 250–400 SF PT or entry-level composite, normal stairs/rails, standard footings.
Best
Premium / multi-level
$50,000 – $85,000+
Larger or multi-level decks, premium composite, feature railings.
Typically includes
Framing, decking, railing, stairs as scoped, standard footings, fastening.
Typically excludes
Demo of unusual structures, retaining walls, major grading, covered or screened porch, engineering if required, landscaping restore.
Installed starting range — not a quote. Firm after site visit. Height, soil, access, and railing choices change the number. This is a planning range only — not a bid or contract.
Flooring · installed SF
Starting Installed Ranges
Per-square-foot planning ranges. LVP installed starting ~$7–$11/SF. Carpet and hardwood shown as planning ranges; firm after site measure.
Product
Starting installed range
Notes
LVP / vinyl plank
$7 – $11 / SF
Starting installed range; upper end adds prep, tear-out, transitions, and base
Carpet
$5 – $9 / SF
Planning range; firm after site measure
Hardwood / engineered
$10 – $16 / SF
Planning range; firm after site measure
Example LVP room totals (using the starting installed range plus a light allowance): 200 SF ≈ $1,500–$2,500 · 500 SF ≈ $3,600–$6,000 · 1,000 SF ≈ $7,200–$12,000.
Typically includes
Material and install per product for a straightforward floor.
Typically excludes
Major floor leveling, furniture move-out, stairs, moisture remediation, subfloor replace (call out as adders).
Installed starting range — not a quote. Firm after site visit. Prep, tear-out, and moisture conditions change the number. Carpet and hardwood figures are planning ranges; firm after site measure. This is not a bid or contract.